Reusable Roof Anchor

SOLD BY THE EA

Features:

• Installed on peak or flat wood and metal decking roofs
• Hinged construction for adjustment to different angles
• Corrosion resistant plated steel
• Large D-ring connection point
• Fasteners not included

Minimum Breaking Strength: 5,000 lbs.

ANSI Weight Capacity: 130-310 lbs. (59-141 kg)

OSHA Weight Capacity: Up to 420 lbs. (191 kg)

TECH SHEET

MANUAL

• 5,000 lb. anchorage point
• Steel construction
• Includes 20 16D nails for single use
• 3 lbs. total weigh
• Complete with cadmium plated forged alloy steel D-ring
• Nail into the sheathing and joist, rafter, etc. (roof member)
• 5,000 lb. Minimum breaking strength

Girder Grip Anchor - Steel

SOLD BY THE EA

Features:

• For metal and steel structures
• Used horizontally or vertically
• Fits hole diameter minimum 13/16" min. up to 1-1/4"
• Installs into steel substrate with a maximum thickness of 1-1/4"

Materials: Zinc plated steel

Weight: 0.6 lbs. (0.3 kg)

Dimensions: 0.25" x 2" x 4.5"

Minimum Breaking Strength: 5,000 lbs.

ANSI Weight Capacity: 130-310 lbs. (59-141 kg)

OSHA Weight Capacity: Up to 420 lbs. (191 kg)

ANSI Standards: Z359.1, A10.32

OSHA Standards: 1926.502

TECH SHEET

• Detachable roof anchor for open trusses, joists and rafters
• Removable D-ring assembly allows you to leave behind the clamp assembly and shingle over it leaving nothing to stick our from the roof and re-use D-ring assembly
• Simply install by clamping onto joist, rafter, etc. (roof member)
• Complete with flashing to prevent water leakage through the roof during construction
• Fits 2x4 roof truss, joist or rafter
• 5,000 lb. Minimum breaking strength
• Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359

• Material: Zinc plated steel
• Nails: 120 16d nails (10 for each anchor)
• Capacity: 310 lbs. (139.5 kg)
• Weight: 0.9 lbs. Minimum
• Breaking Strength: 1,800 lbs. - rated for fall arrest
• Compliance: OSHA 1926.502
• Easy to install
  
  3M™ PROTECTA® PRO™ Knock-Down Disposable Roof Anchor 2103680 | 3M United States

• Permanent roof anchor for open trusses, joists and rafters
• Complete with integral D-ring anchorage point
• Weather tight cap protects the anchor from corrosion by sealing it from the environment
• The cap hides the anchor providing the homeowner with an aesthetically pleasing roof line
• Simply install by clamping onto joist, rafter, etc. (roof member)
• Complete with thermoplastic flashing to prevent water leakage through the roof
• Fits up to 2x8 roof truss, joist or rafter
• 5,000 lb. Minimum breaking strength
• Meets or exceeds all applicable industry standards including OSHA and ANSI

REUSABLE 5K CONCRETE ANCHOR

SOLD BY THE EA

FEATURES

Rapid. Rigid. Reusable.

Secure one-hand operation with push-to-stop installation

Quick-release button for removability

Diamond-hard carbon coating

Cycle tested to 5,000 uses

Corrosion-resistant stainless steel tri-wedge design

Forged stainless steel swivel D-Ring

ANSI Z359.18-2017 Type A and OSHA 1910 & 1926

DETAILS

Style: Concrete D-Bolt

Minimum Breaking Strength (lb): 5,000

Color: Silver

Material: Stainless Steel

Anchor Application: Concrete

Certifications: ANSI z359.18-2017,OSHA 1910 & 1926

Permanent/Temporary: Temporary

DIMENSIONS

Approx. Product Length (in): 7.5

Approx. Product Height (in): 1

Approx. Product Width (in): 2.7

Approx. Product Weight (lb): 0.7

Approx. Shipping Length (in): 9

Approx. Shipping Width (in): 4

Approx. Shipping Height (in): 1.5

DATA SHEET

• Removable/Reusable 1/4" thick steel roof anchor
• Complete with zinc plated forged alloy steel O-ring
• Nail (twelve 16d {penny}) or bolt (six 1/4"x2-1/2" or longer lag screws) into the sheathing and joist, rafter, etc. (roof member)
• Designed to be removable, it may be used again after an inspection
• 5,000 lb. Minimum breaking stregth
• Length when flat = 25 inches - Weight = 4.4 lbs.
• Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359

A550000 I-BEAM SLIDING ANCHOR

The Werner A550000 I-Beam Sliding Anchor is a lightweight, adjustable clamp which attaches to I-Beam flanges and slides along the beam as the user moves. The Aluminum design fits beam flanges from 3-1/2 inch to 14 inch with thickness of 1-1/4 inch. Easy to adjust in and out and its design moves smoothly along the beam.

Features
Lightweight aluminum design moves smoothly across beam
Fits beam flanges from 3-1/2 in to 14 in
Fits beams up to 1-1/4 in thick
Certifications/ Code Meets ANSI & OSHA Standards

https://wernerco.widen.net/view/pdf/a6v67ikc4k/105...

https://wernerco.widen.net/view/pdf/qyeu4j3mxy/GM7...

Standing Seam Roof Anchor

SOLD BY THE EA

The Standing Seam Roof Anchor is a compact non-penetrating roof anchor designed for use on both sloped or flat standing seam roofs.

Top of Form

Bottom of Form

Features:

• Easy to install, reusable non-penetrating anchor point
• Designed for sloped or flat standing seam roofs
• Accommodates a wide range of standing seams

Minimum Breaking Strength: 3,600 lbs.

Weight Capacity: 130-310 lbs. (59-141 kg)

TECH SHEET

MANUAL