Safety Compliance Products

Payment Processing

Home > Safety Signage > Safety Compliance Products

Sort By:

Page of 11

EG10 - Deslauriers Econ-O-Guard Rebar Cap

Our Price: $0.30

Econ-O-Guard caps are great for minimizing the risk for accidents involving people or equipment when working around rebar, pipes, and bolts. The bright orange color makes them easily visible and this item is weather resistant, allowing it to be used over and over again.

Sold by the each

Features:

- Reusable
- Weather resistant
- Brightly colored for easy visibility
- Compatible with rebar size #3 through #8

econ-o-guard.pdf

DISC-10 - Deslauriers Impalement Safety Rebar Protector Cover

Our Price: $1.40

Deslauriers Impalement Safety Covers

• Fits rebar #3-8, 3/8" to 7/8" diameter

• Lightweight and chemical resistant

• Stands up to weather and temperature conditions

• Safety orange color provides visibility

• Dimension: 3.5" W x 3.5" H

Approved by California OSHA #C1718AG and OSHA 1723AG

Deslauriers' Caps are steel reinforced and conform to State and Federal safety regulations.

Complies with Federal OSHA 701 (b).
Federal OSHA has ruled that if cover is in compliance with Cal OSHA, then it conforms to Fed. 701 (b).

BARGARD® caps are not designed or intended to provide impact or impalement protection. They are not a substitute for covering vertical reinforcing steel with timber, as recommended by OSHA, and are not recommended for use when protection from falls is required. For additional information on acceptable methods of guarding against impact or impalement, consult OSHA CFR TITLE 29, PART 19120, ANSI A10.9-1983, and your state regulations for specific requirements.

Sold by the each

cal_osha_approval.pdf

CC-100 - Carnie Cap Anti-Impalement Rebar Caps

Protect workers from impalement on exposed rebar by installing Carnie Caps on your next jobsite! This item is made for use with standard 2" x 4"' lumber creating a barrier between workers and dangerous exposed rebar. The Carnie Cap is also more cost effective than traditional troughs. In fact, you would only need two Carnie Caps to work in an eight foot section. By preventing costly injuries, delaying various projects, the easily installed Carnie Cap allows companies to protect their bottom line as well as employee

Features:

Economical
When force is applied to the Carnie Cap system, the impact is distributed evenly over the entire length of the lumber.
Meets OSHA standards for withstanding a 250 pound weight dropped from 7’6" without the rebar breaking through
Meets CAL-OSHA Construction Safety Orders Section #1712 on impalement protection from concrete reinforcing bars.
Made of rugged, sturdy and reusable plastic.
Quick and easy to install.
Eliminates costs associated with injuries and downtime from rebar impalement.
Available for use on 2" x 4"
Fits rebar sizes #3-#9 and #5-#18.
Works in vertical, incline and horizontal applications.
Uses only 2 caps per each 8 foot span. (in California, double the thickness of the lumber and space no greater than 4 feet apart.)
Enables contractors to more efficiently use concrete blankets by utilizing the lumber as protective support so blankets don’t become torn.

Can be purchased individually or by the case of 100

420 - Master Lock Lockout Hasp with 1" Jaw

Our Price: $6.00

Master Lock Steel Lockout Safety Hasp 1in Jaw Clearance

Sold by the each

Features:

Lockout by multiple workers at each lockout point
Keeps equipment inoperative while repairs or adjustments are made
Control cannot be turned on until last worker's padlock is removed from hasp
Heavy gauge steel jaw with red vinyl coated handle
Dimensions are 1-3/4" x 4-1/2" (4.4cm x 11.4cm) with 1" (2.5cm) inside jaw diameter, holds up to 6 padlocks

428 - Master Lock Plastic Lockout Hasp

Our Price: $6.27

Master Lock Nylon Non-Conductive Safety Lockout Hasp

Sold by the each

Features:

- Lockout by multiple workers at each lockout point
- Keeps equipment inoperative while repairs or adjustments are made
- Spark proof nylon construction
- Dimensions are 1-5/8" x 6-7/8" (4.1cm x 17.4cm) with 1" x 2-1/2" (2.5cm x 6.3cm) inside jaw diameter, holds up to 6 padlocks

0118871 - Mutual Industries Orange Pennant Flag 9" x 12" x 60'

Our Price: $6.32

Orange Pennant Flag 9" x 12" x 60'
Mutual´s pennant flags come in 60´ long strings containing 36 brightly colored 9” x 12” pennants. Ideal for use at construction sites, scaffolding, wet floors, sporting events, grand openings, open houses, and other practical applications.

Sold by the roll
WARNING

This product can expose you to chemicals including Diisonoyl phthalate (DINP) which are known to the State of California to cause cancer.

416 - Master Lock Aluminum Lockout Hasp

Our Price: $6.36

Master Lock Aluminum Lockout Hasp

Sold by the each

Features:

- Lockout by multiple workers at each lockout point
- Keeps equipment inoperative while repairs or adjustments are made
- Control cannot be turned on until last worker's padlock is removed from hasp
- Spark resistant aluminum construction
- Dimensions are 1-1/2" x 4-3/8" (3.8cm x 11.1cm) with 1" (2.5cm) inside jaw diameter, holds up to 6 padlocks

5501 - Horizon Mfg. Lock Out-Tag Out Hasps Small Size

Our Price: $7.00

Red 1″ Lockout Tagout Hasp Standard Style small size from Horizon Manufacturing

1" Opening
4.2" Length

Features:
Protect against accidents.
• Make sure all machinery stays locked out until every individual working on the repairs or inspection is finished.
• Each person puts a lock on the hasp, but the hasp cannot be removed until all lockouts have been removed, thus preventing accidents.
• Constructed of heavy-duty steel which resists tampering, zinc plated to prevent rusting.
• Red rubberized coating.
• Holds up to 6 padlocks.
• Available in 2 different styles: standard and interlocking
Lock Out-Tag Out Hasp

Sold by the each

421 - Master Lock Steel Lockout Hasp with 1-1/2" Jaw

Our Price: $7.01

421H - Master Lock Steel Lockout Hasp w/ 1-1/2" Jaw

Sold by the each

Features:

Lockout by multiple workers at each lockout point
Keeps equipment inoperative while repairs or adjustments are made
Control cannot be turned on until last worker's padlock is removed from hasp
Heavy gauge steel jaw with red vinyl coated handle
Dimensions are 2-3/8" x 5" (6cm x 12.7cm) with 1-1/2" (3.8cm) inside jaw diameter, holds up to 6 padlocks

LO80 - Master Lock Lockout Hasp

Our Price: $7.12

Master Lock Lockout Hasp

Sold by the each

Features:

- Lockout by multiple workers at each lockout point
- Attach device to energy disconnect switch
- Keeps equipment inoperative while repairs or adjustments are made
- Control cannot be turned on until last worker's padlock is removed from hasp
- Heavy duty pry proof steel jaw with vinyl coated handle
- Dimensions are 1-3/4" X 4-1/2" (4.4cm x 11.4cm) with 1" (2.5cm) inside jaw diameter, holds up to 6 padlocks