(Specific Fit for MSA Fas-Trac III suspensions)
*****Hard hat suspension not included***** -sweatband only
Passive Helmet
Lightweight thermoplastic shell.
Fully adjustable nylon suspension
Lift front with viewing area of 2” X 4 ¼”
“Shake Down” helmet minimizes carbon monoxide build up
Optionally balanced Ample space for respirators.
Meets ANSI Z87.1-2003 standards
Fitted with IR shade #10 welding filter
Sold by the eachWHP100 ANSI Product Sheet
Common N95 APPLICATIONS:
Hot and humid environments such as Grinding, Torch Cutting, Sanding, Metal Pouring, Sweeping, Metal Working, Bagging, Foundries, Stone Quarrying, Agriculture, Metal Machining, Construction Sites, Cement, Ceramics Manufacturing, Underground Mining, Timber/Lumber Mills, Polishing, Buffing, Lime, Poultry, Textiles, Welding, Brazing, Soldering.No oils present. Note: For areas with oils present, you must use an R or P respirator.
The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability.Features
Polyethylene shell provides superior impact protection
Self-adjusting crown straps ensure a comfortable fit
Available in a variety of colors and sizes
Slotted design works with MSA accessoriesSold by the each Markets: Construction, General Industry, Oil & Gas, Utilities, Mining Applications: Confined Space, Working at Heights, Welding Approvals
ANSI Z89.1-2014
HDMSA03_SEI_20180413_AL
2300N95 Series Particulate Respirators With Exhale ValveWorkers stay cooler with an exhale valve that reduces hot air build up. There’s less breathing resistance and workers don’t have to break midshift to cool off. The molded nose bridge with soft foam nose cushion provides the wearer an easy comfortable fit. There’s no metal noseband to adjust and the seal is maintained without pressure points. The Dura-Mesh® shell, exclusive to Moldex®, protects the filter media so it stays cleaner-looking longer. The shell resists collapsing, even in heat and humidity so the respirator holds its shape longer. The result is fewer respirators used and lowered costs. 2300 Series Particulate Respirators are suitable for most welding applications. Dura-Mesh®’s Dura-Mesh® shell resists collapsing in hot humid conditions common to most welding applications. Meets heat and flame resistance in accordance with ANSI/ISEA 110.2003 Section 7.11.1.
N95 APPLICATIONS:
Grinding, Torch Cutting, Sanding, Metal Pouring, Sweeping, Metal Working, Bagging, Foundries, Stone Quarrying, Agriculture, Metal Machining, Construction Sites, Cement, Ceramics Manufacturing, Underground Mining, Timber/Lumber Mills, Polishing, Buffing, Lime, Poultry, Textiles, Welding, Brazing, Soldering.No oils present. Note: For areas with oils present, you must use an R or P respirator.
Sold by the Box of 10
https://www.moldex.com/wp-content/uploads/2300-807-REV-A-1-19-data-sheet.pdfhttps://www.moldex.com/wp-content/uploads/Combo_Fitting_Poster.pdf
Features· HandyStrap allows mask to hang down loosely and comfortably around the user's neck when not in use· Cloth HandyStrap feels cool and comfortable· Added carbon layer helps filter out nuisance levels of ozone and organic vapors (less than OSHA PEL)· Can be used against most welding fumes (free of oil)· Fits easily under welding hoods· Ventex valve lets the hot air out faster so workers breathe easier and stay cooler· Soft foam nose cushion for added comfort and less pressure· Dura-Mesh® shell resists collapsing in heat and humidity· Molded nose bridge seals easily without a metal noseband· Facepiece is naturally contoured for less pressure· Softspun® lining for increased comfort and durability· NIOSH certified to have a filter efficiency of 95% against non-oil based particulates· Certified under 42CFR84· Meets heat and flame resistance in accordance with ANSI/ISEA 110-2009 Section 7.11.1· Available in two sizes, for most workers and OSHA compliance· 100% PVC-Free, like all Moldex products & packaging - for a greener alternative· Made in U.S.A.
Welding, Arc Cutting, Foundry Operations, Brazing, Plasma Spraying, Laser Beam Cutting/Welding, Laboratory Settings, Agriculture, Petrochemical Manufacturing, Rendering Plants, Auto Repair, Mining Operations, Waste Disposal. No oils present. Note: For areas with oils present, you must use an R or P respirator.2800 HandyStrap® DatasheetFitting Poster
The lightweight, disposable N95 particulate respirator is designed to help provide respiratory protection for certain non oil particles in applications such as welding, soldering and other operations in which metal fumes may be present. 3M uses a variety of innovative technologies and features to help you meet your respiratory protection and comfort needs. The specially designed cake resistant filter media provides longer respirator life. The respirator incorporates 3M's proprietary technology with advanced electrostatically charged microfiber filter media, designed for ease of breathing. The proprietary 3M™ Cool Flow™ Exhalation Valve helps reduce heat build up inside the respirator to help keep the wearer more comfortable. These combined features, along with the foam face seal and fully adjustable straps are designed to help enhance user comfort and increase wearability. • N95 Approved filtering facepiece particulate respirator • 3M™ Cool Flow™ Exhalation Valve • Comfortable foam face seal • Cake resistant filter media • Flame resistant as demonstrated per modified ASTM D2859 (not a substitute for a faceshield) • Carbon filter material for ozone* and nuisance level organic vapors** • Compatible with a variety of protective eyewear and hearing protection • Adjustable noseclip helps provide a custom and secure sealSold by the box of 103M™ Particulate Respirator, 8214, N95 Technical Specification3M™ Particulate Respirator N95, 8214, 8514 User InstructionsRecommended ApplicationsGrindingProcessing of MineralsCleaningWeldingFoundry OperationsAssembly and MechanicalPetrochemicalPetrochemical ManufacturingComposite FinishingPaint PreparationFinal Finish
Customer Service: (800) 322-6822
