Reusable Roof Anchor

SOLD BY THE EA

Features:

• Installed on peak or flat wood and metal decking roofs
• Hinged construction for adjustment to different angles
• Corrosion resistant plated steel
• Large D-ring connection point
• Fasteners not included

Minimum Breaking Strength: 5,000 lbs.

ANSI Weight Capacity: 130-310 lbs. (59-141 kg)

OSHA Weight Capacity: Up to 420 lbs. (191 kg)

TECH SHEET

MANUAL

Girder Grip Anchor - Steel

SOLD BY THE EA

Features:

• For metal and steel structures
• Used horizontally or vertically
• Fits hole diameter minimum 13/16" min. up to 1-1/4"
• Installs into steel substrate with a maximum thickness of 1-1/4"

Materials: Zinc plated steel

Weight: 0.6 lbs. (0.3 kg)

Dimensions: 0.25" x 2" x 4.5"

Minimum Breaking Strength: 5,000 lbs.

ANSI Weight Capacity: 130-310 lbs. (59-141 kg)

OSHA Weight Capacity: Up to 420 lbs. (191 kg)

ANSI Standards: Z359.1, A10.32

OSHA Standards: 1926.502

TECH SHEET

• Pass-through design makes attaching to anchorage quick and easy
• 1-3/4" polyester strength member (5,000 lb. Min. tensile strength)
• 3" wide polyester wear pad for added abrasion resistance and product longevity
• 3 ft. in length, other lengths available (Call for available sizes and pricing)
• Coated steel hardware for corrosion resistance and strength
• Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359

REUSABLE 5K CONCRETE ANCHOR

SOLD BY THE EA

FEATURES

Rapid. Rigid. Reusable.

Secure one-hand operation with push-to-stop installation

Quick-release button for removability

Diamond-hard carbon coating

Cycle tested to 5,000 uses

Corrosion-resistant stainless steel tri-wedge design

Forged stainless steel swivel D-Ring

ANSI Z359.18-2017 Type A and OSHA 1910 & 1926

DETAILS

Style: Concrete D-Bolt

Minimum Breaking Strength (lb): 5,000

Color: Silver

Material: Stainless Steel

Anchor Application: Concrete

Certifications: ANSI z359.18-2017,OSHA 1910 & 1926

Permanent/Temporary: Temporary

DIMENSIONS

Approx. Product Length (in): 7.5

Approx. Product Height (in): 1

Approx. Product Width (in): 2.7

Approx. Product Weight (lb): 0.7

Approx. Shipping Length (in): 9

Approx. Shipping Width (in): 4

Approx. Shipping Height (in): 1.5

DATA SHEET

A550000 I-BEAM SLIDING ANCHOR

The Werner A550000 I-Beam Sliding Anchor is a lightweight, adjustable clamp which attaches to I-Beam flanges and slides along the beam as the user moves. The Aluminum design fits beam flanges from 3-1/2 inch to 14 inch with thickness of 1-1/4 inch. Easy to adjust in and out and its design moves smoothly along the beam.

Features
Lightweight aluminum design moves smoothly across beam
Fits beam flanges from 3-1/2 in to 14 in
Fits beams up to 1-1/4 in thick
Certifications/ Code Meets ANSI & OSHA Standards

https://wernerco.widen.net/view/pdf/a6v67ikc4k/105...

https://wernerco.widen.net/view/pdf/qyeu4j3mxy/GM7...

Standing Seam Roof Anchor

SOLD BY THE EA

The Standing Seam Roof Anchor is a compact non-penetrating roof anchor designed for use on both sloped or flat standing seam roofs.

Top of Form

Bottom of Form

Features:

• Easy to install, reusable non-penetrating anchor point
• Designed for sloped or flat standing seam roofs
• Accommodates a wide range of standing seams

Minimum Breaking Strength: 3,600 lbs.

Weight Capacity: 130-310 lbs. (59-141 kg)

TECH SHEET

MANUAL

• Designed for the CB series pass-thru system
• Durable galvanized finish
• For use on wood, steel, or concrete substrates
• Attached CB pass-thru top
  
  85341 (Rev. A) 00645 CB-12 small
  
  CB-12 Anchor - 00645, 00651 - Sell Sheet (small)